Home > Logic Output Optoisolators >

High speed optocoupler JSMSEMI 6N137 500E JSM for logic system isolation and microprocessor interface

Product Categories

Digital Isolators [228]
Isolators - Gate Drivers [194]
Logic Output Optoisolators [243]
Transistor, Photovoltaic Output Optoisolators [647]
Special Purpose Isolators [2]
Triac, SCR Output Optoisolators [463]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High speed optocoupler JSMSEMI 6N137 500E JSM for logic system isolation and microprocessor interface

Output Current : 50mA

Low Level Delay Time : 100ns

High Level Delay Time : 100ns

Input threshold current : 15mA

Reverse Voltage : 5V

Voltage - Forward(Vf) : 1.4V

Voltage - Supply : 4.5V~5.5V

Forward Current(If) : 20mA

Operating Temperature : -40℃~+85℃

CMTI(kV/us) : 5kV/us

Isolation Voltage(Vrms) : 5kV

Number of Channels : 1

Input Type : DC

Description : 50mA 5V 1.4V 4.5V~5.5V DC SOP-8 Logic Output Optoisolators RoHS

Mfr. Part # : 6N137-500E-JSM

Model Number : 6N137-500E-JSM

Package : SOP-8

Contact Now

High-Speed Optocoupler

This high-speed optocoupler consists of a high-intensity infrared light-emitting diode and a high-speed, high-gain photosensitive integrated circuit. It is designed for high-speed logic system isolation, offering features such as TTL/LSTTL compatibility, low input current, and a wide operating temperature range. It is an ideal replacement for pulse transformers and provides isolation for various interfaces including computer peripherals, microprocessor systems, A/D and D/A converters, switch-mode power supplies, instrument input/outputs, and motor driver high-side triode isolation. It also helps eliminate ground loop noise.

Applications:

Line receiver isolation
Computer-peripheral interface
Microprocessor system interface
Digital signal isolation for A/D, D/A conversion
Switching power supplies
Instrument input/output isolation
Elimination of ground loop noise
Replacement for pulse transformers
High-side triode isolation in motor drivers
Isolation of high-speed logic systems

Product Attributes:

Brand: JSMICRO Semiconductor
Compatible Models: 6N137, HCPL2601, HCPL2611
Speed: 10 MBd
TTL Compatibility: LSTTL/TTL compatible
Low Input Current: 7.5mA
Operating Temperature: -40C to +85C
Package Forms: 8-Pin DIP, 8-Pin SMD

Technical Specifications:

Parameter	Symbol	Min.	Typ.	Max.	Unit	Test Conditions
Absolute Maximum Ratings
Storage Temperature	TS	-55		125	C
Operating Temperature	TA	-40		85	C
Input Forward Current	IF			20	mA
Input Reverse Voltage	VR			5	V
Supply Voltage (Max 1 minute)	VCC			7	V
Input Strobe Voltage	VE			VCC + 0.5	V	(Not greater than VCC + 500mV)
Input Strobe Current	IE			5	mA
Output Collector Current	IO			50	mA
Output Collector Voltage	VO			7	V
Output Collector Power Dissipation	PO			85	mW
Recommended Operating Conditions
Input Current, Low Level	IFL	0		250	A
Input Current, High Level	IFH	7.5		15	mA
Supply Voltage	VCC	4.5		5.5	V
Low Level Strobe Voltage	VEL	0		0.8	V
High Level Strobe Voltage	VEH	2.0		VCC	V
Operating Temperature	TA	-40		85	C
Number of TTL Loads (with load on RL = 1 k)	N	5
Output Pull-up Resistor	RL	330		4	k
Electrical Characteristics (Operating Conditions: TA=-40C to +85C; Typical conditions: TA=25C, Vcc = 5 V)
High Level Output Current	IOH		5.5	100	A	VO=5.5V, IF=250A
Input Threshold Current	ITH	3.0	5.0		mA	VO=0.6V, IOL(Sinking)=13mA
Low Level Output Voltage	VOL		0.35	0.6	V	VCC=5.5V VE=2.0V IF=5mA, IOL(Sinking)=13mA
High Level Supply Current	ICCH		7.0	10.0	mA	IF = 0 mA
Low Level Supply Current	ICCL		9.0	13.0	mA	VE= 0.5V, VCC=5.5V IF = 10 mA
High Level Strobe Current	IEH	-0.7	-1.6		mA	VCC= 5.5V, VE = 2.0 V
Low Level Strobe Current	IEL	-0.9	-1.6		mA	VCC= 5.5V, VE = 0.5 V
High Level Strobe Voltage	VEH	2.0			V
Low Level Strobe Voltage	VEL		0.8		V
Input Forward Voltage	VF	1.4	1.75		V	IF = 10 mA
Input Reverse Voltage	VR	5			V	IR = 10 A
Switching Characteristics (AC) (Operating Conditions: TA=-40C to +85C, Vcc=5V, IF=7.5mA; Typical conditions: TA=25C, Vcc=5V)
High Level Output Delay Time	tPLH		50	100	ns	RL=350, CL=15pF
Low Level Output Delay Time	tPHL		60	100	ns	RL=350, CL=15pF
Pulse Width \| tPHL -tPLH \|			40		ns
Rise Time (10-90%)	tr		30		ns	RL = 350 , CL = 15 pF
Fall Time (90-10%)	tf		10		ns	RL = 350 , CL = 15 pF
Strobe Delay Time (VEH to VEL)	tELH		30		ns	VEL = 0 V, VEH = 3 V
Strobe Delay Time (VEL to VEH)	tEHL				ns
Isolation Characteristics (Typical conditions: TA=25C)
Input-Output Leakage Current	II-O		1		A	45% RH, t = 5s, VI-O=3kV dc
Input-Output Isolation Voltage	ISO	5000			V rms	RH 50%, t = 1 min
Input-Output Isolation Resistance	RI-O	10¹²				VI-O = 500 V dc
Input-Output Isolation Capacitance	CI-O		0.6		pF	f = 1 MHz
Common Mode Transient Suppression Ratio (Output Low Level)	CMH	5000	10000	15000	V/S	VCM=400Vp-p, IF = 7.5mA, RL=350, TA=25C
Common Mode Transient Suppression Ratio (Output High Level)	CML	5000	10000	15000	V/S	VCM=400Vp-p, IF = 0mA, RL=350, TA=25C

2409280002_JSMSEMI-6N137-500E-JSM_C17701731.pdf

Wholesale High speed optocoupler JSMSEMI 6N137 500E JSM for logic system isolation and microprocessor interface from china suppliers

High speed optocoupler JSMSEMI 6N137 500E JSM for logic system isolation and microprocessor interface Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!